-
About UsFocus on equipment manufacturing, research and development, production, and sales, based on the principle of optimizing the design efficiency of bed infrastructure from mechanical, electrical, and hydraulic systems, enhancing the strength of reliable hardware, CNC II system. Develop intelligent accessories, including the strictest manufacturing processes and precise product inspection.
-
BLOGThe company prioritizes customers first, service first, providing comprehensive equipment with high quality and speed, along with intelligent solutions.
-
ContactCreate business value and customer value together to provide high stability and reliability to customers for CNC machinery equipment and technical support!
The bed frame components have been optimized using topology software and finite element analysis software. The X-axis uses a dual-rod drive design, and the X-axis employs hollow cooling. All YZ axes use a screw cooling design to ensure that the impact of temperature on accuracy is reduced. The Y-axis 4-rail supports the best dynamic balance.
A-SERIES OVERHEAD GANTRY MACHINING CENTER MODEL
Category:
Technical Parameters
Scroll the table left and right to view all parameters
Full-form support base structure, lower X-axis and upper Y-axis, ensuring the worktable is fully supported under operating conditions throughout the XY axis movement range, avoiding the disadvantages of hanging when a typical vertical machining table moves to the positive X-axis and negative limit positions.
| Specification Description | Unit | EH-1615A | EH-2518A |
| Travel Range | |||
| X-axis Travel | mm. | 1600 | 2500 |
| Y-axis Travel | mm. | 1500 | 1800 |
| Z-axis Travel | mm. | 750 | 950 |
| Distance from spindle end to worktable | mm. | 150-850 | 150-1000 |
| Worktable | |||
| Worktable Size | mm. | 1700x1400 | 2500x1600 |
| Maximum Weight for Worktable | kg. | 4000 | 6000 |
| T-slot Size | mm. | 7-18x125 | 8-22x125 |
| CNC System | |||
| Standard Controller (New Model) | 22MA | ||
| Standard Controller (Mitsubishi) | |||
| Standard Controller (Siemens) | 828D | ||
| Spindle | |||
| Connection Method | Direct Connection Type | ||
| Spindle Speed | RPM | 20000 | |
| Conical Spindle and Specifications | HSK63A-160 | HSK63A-160 | |
| Spindle Motor Torque | kW | 14.1/26/30 | 15/18/22.5 |
| Spindle Motor Torque | Nm | 26/47/55 | 25.6/64.5/80.6 |
| Spindle Motor Torque (Mitsubishi) | kW | - | - |
| Spindle Motor Torque (Mitsubishi) | Nm | - | - |
| Spindle Motor Torque (Siemens) | kW | 14.1/26/30 | 15/18/22.5 |
| Spindle Motor Torque (Siemens) | Nm | 26/47/55 | 25.6/64.5/80.6 |
| Three Axes | |||
| Three-Axis Motor Power X/Y/Z (New Model) | kW | 3.0 / Dual Drive 2 units / 4.5 / 4.5 | |
| Three-Axis Motor Power X/Y/Z (Mitsubishi) | kW | - | - |
| Three-Axis Motor Power X/Y/Z (Siemens) | kW | 3.0 / Dual Drive 2 units / 4.5 / 4.5 | 3.0 / Dual Drive 2 units / 4.5 / 4.5 |
| Three-Axis Motor Power X/Y/Z (New Model) | Nm | Y:2/20 X:22.5/Z:45 | Y:2/45 X:45/Z:64 |
| Three-Axis Motor Power X/Y/Z (Mitsubishi) | Nm | - | - |
| Three-Axis Motor Power X/Y/Z (Siemens) | Nm | Y:2/22 X:66/Z:66 | Y:2/22 X:66/Z:66 |
| Rapid Movement Speed X/Y/Z (New Model) | m/min | 30/30/30 | 30/30/30 |
| Rapid Movement Speed X/Y/Z (Mitsubishi) | m/min | - | - |
| Rapid Movement Speed X/Y/Z (Siemens) | m/min | 30/30/30 | 30/30/30 |
| Table Accuracy | |||
| Positioning Accuracy (Two-Dimensional) | mm. | ±0.005 / 300 | |
| Repeatability Accuracy | mm. | ±0.003 / 300 | |
| Machine | |||
| Air Pressure Parameters | kg/cm² | 6-7bar | |
| Mechanical Characteristics | mm. | 4900 | 5900 |
| Width Dimension | mm. | 3900 | 4100 |
| Height Dimension | mm. | 3700 | 3900 |
| Machine Weight | kg. | 15000 | 19000 |
Product Consultation
* Note: Please make sure to fill in the correct information and maintain smooth communication. We will contact you as soon as possible!
Contact Us
Contact Address 1: House No. 10/47, Alley 168, Jinjiang Road
Message